01
Indoor fixing
Zinc-plated carbon steel for controlled dry environments where permitted.
Wedge AnchorRepresentative product image. Final dimensions, material, finish and packing follow the approved RFQ.
Concrete anchoring sourcing
Wedge Anchor
Torque-controlled wedge anchors for concrete fastening, reviewed by anchor diameter, fixture thickness, embedment, base material and project load requirements.
- Anchor type, drawing or required approval basis
- Diameter, overall length and fixture thickness
- Concrete condition, strength and embedment
- Design load, edge spacing and installation environment
- Material, finish, quantity and packing
Catalogue ranges are RFQ guidance. Final compliance is controlled by the buyer-approved standard, drawing, sample and purchase order.
Quotation control
Information used to build the quotation
The exact standard or drawing, dimensions, material, finish, quantity and destination are confirmed before sourcing.
| Field | Product information | Order control |
|---|---|---|
| Requested product | Torque-controlled wedge anchor assembly | Drawing or system basis confirmed |
| Base material | Cracked or non-cracked concrete and specified strength | Confirmed per RFQ |
| Geometry | Diameter, length, fixture thickness and effective embedment | Confirmed per RFQ |
| Design inputs | Tension, shear, edge distance, spacing and safety basis | Confirmed per RFQ |
| Material / finish | Zinc plated, hot-dip galvanized or stainless grade | Confirmed per RFQ |
| Approval / records | State project approval, test report or traceability requirement | Confirmed per RFQ |
Product overview
Anchor selection begins with the base material
Wedge anchors develop capacity through expansion against the drilled hole. Concrete condition, embedment, spacing, edge distance and installation quality directly affect suitability.
This page presents sourcing ranges only. Structural design values and approvals must come from the selected anchor system documentation and project engineer.
Common ordering range
Common RFQ selections
Common wedge-anchor sourcing sizes. Final length and embedment are selected from fixture and design conditions.
| Selection | Common enquiry options | Control |
|---|---|---|
| Common diameters | M6, M8, M10, M12, M16, M20 and M24 | Confirmed per RFQ |
| Length / embedment | Selected from fixture thickness and required effective embedment | Confirmed per RFQ |
| Base material | Concrete condition and compressive strength must be stated | Confirmed per RFQ |
| Material options | Carbon steel, hot-dip galvanized steel, stainless A2 or A4 | Confirmed per RFQ |
| Installation data | Hole diameter, drilling depth, cleaning and tightening torque as approved | Confirmed per RFQ |
| Project control | Required approval, load data, inspection and traceability stated in RFQ | Confirmed per RFQ |
Custom supply: Non-standard dimensions, materials, finishes and packing can be reviewed against a drawing, approved sample or complete specification.
Materials & applications
Options matched to the working environment
Options shown are sourcing directions, not a claim that every combination is stocked or interchangeable.
02
Outdoor exposure
Hot-dip galvanized or stainless options reviewed for the corrosion category.
03
Engineered anchors
Load, concrete condition and approval requirements are controlled by the project.
Quality & order coordination
A controlled route from RFQ to shipment
Inspection, certificates, traceability and packing are supplied only when agreed in the quotation and order.
01
Requirement check
Standard, drawing revision and critical dimensions are recorded.
02
Source matching
Cluster suppliers are compared against the confirmed specification.
03
Agreed inspection
Dimensions, finish and documents are checked to the agreed scope.
04
Packing follow-up
Labels, protection, consolidation and shipment details are coordinated.
Product RFQ
Request a quotation for Wedge Anchor
Send a drawing, specification, photo, product list or project requirement. Mark any field that cannot be substituted.
- Anchor type, drawing or required approval basis
- Diameter, overall length and fixture thickness
- Concrete condition, strength and embedment
- Design load, edge spacing and installation environment
- Material, finish, quantity and packing
Fast quotation route
Send your product requirements
Include the product standard or drawing, size, material, finish, quantity and destination. Files up to 5 MB can be attached in the RFQ form.Maximum 3 MB per file.
Related products