CS
Steel direction
State strength requirement, coating and any process or test control needed.
DIN 976-1 product referenceThread, length, material, finish, end treatment and packing are confirmed against the buyer’s RFQ.
Metric stud bolt and threaded rod
DIN 976-1 Threaded Rod
Quotation-ready sourcing for metric threaded rods and stud bolts under DIN 976-1, with length form, thread, material group, strength marking, finish, end treatment and documentation controlled.
- Current DIN 976-1 edition identified
- Thread system, length and end treatment confirmed
- Material group and mechanical requirement recorded
- Finish, marking, straightness and packing agreed
Final geometry, tolerances, material, mechanical requirements, finish, testing, documents and packing are governed by the buyer-approved RFQ and order specification.
Product views
DIN 976-1 threaded rod details
Reference views for full thread, cut-end quality and representative diameter and length range. Final supply follows the confirmed RFQ.
Core specification
Quotation requirements
Confirm the standard basis, sourcing options and order-specific requirements below.
| Field | Product information | Status |
|---|---|---|
| Current reference | DIN 976-1:2016-09 | Verified current DIN reference |
| Product scope | Stud bolts / threaded rods with metric thread | Verified product description |
| Thread | Diameter, coarse or fine pitch, tolerance and hand | Confirmed per RFQ |
| Length / ends | Nominal length, cut length, chamfer and end condition | Confirmed per RFQ |
| Material / mechanical requirement | Steel, stainless steel or non-ferrous metal with required properties | Typical supply direction |
| Finish | Plain, zinc, hot-dip galvanized or project-specified coating | Typical supply direction |
| Marking / packing | Marking, bundling, end protection, labels and agreed records | Confirmed per RFQ |
DIN 976-1:2016-09 is the reference edition for this enquiry. Confirm thread diameter, pitch, tolerance, handedness, length, material, mechanical requirements, end form and finish, or provide an approved drawing. Catalogue references: DIN Media
Product overview
Thread, strength and finish are separate controls
A threaded rod line item should define more than diameter and length. The governing edition, pitch, tolerance, material, strength requirement, coating, marking, end condition and packing all affect supplier comparison and assembly fit.
DIN Media lists DIN 976-1:2016-09 as current and states that it specifies properties and marking for metric stud bolts made from steel, stainless steel and non-ferrous metal.
What to include in your RFQ
- DIN 976-1:2016-09 or approved drawing
- Diameter, pitch, tolerance and hand
- Length, cut tolerance and end treatment
- Material and mechanical requirement
- Finish, marking and straightness requirement
- Quantity, bundling, labels and documents
Verified technical note
Current DIN scope used for review
The official catalogue confirms product scope and material groups; exact dimensions and properties remain governed by the purchased standard and RFQ.
| Reference / field | Verified scope used on this page | RFQ implication |
|---|---|---|
| DIN 976-1:2016-09 | Current standard for stud bolts with metric thread | Use the current edition unless the buyer identifies a legacy edition or drawing. |
| Material scope | Official overview includes steel, stainless steel and non-ferrous metal and covers product marking | State the exact material and mechanical requirement rather than choosing only a generic material family. |
| Mechanical review | ISO 898-1:2013 is a current reference for mechanical and physical properties of applicable carbon/alloy-steel bolts, screws and studs | Confirm applicability, size/thread limits and property class for the actual rod order. |
Specification control: Coating can affect fit and hydrogen-embrittlement risk; process controls and any oversize mating thread must be specified where relevant. Full proprietary standard tables are not reproduced.
Official references: DIN 976-1:2016-09 catalogue entry · ISO 898-1:2013 catalogue entry
Materials & supply directions
Options reviewed for the actual application
These are enquiry directions, not a claim that every combination is stocked, approved or interchangeable.
SS
Stainless direction
State grade, condition, passivation and any marking or traceability requirement.
NF
Non-ferrous direction
Specify the exact alloy, mechanical requirements and compatibility with mating components.
Quality & order coordination
Checks follow the approved order requirements
No test report, certification, approval or traceability level is implied unless it appears in the quotation and order specification.
01
Specification record
Standard edition, drawing revision and critical RFQ fields are recorded.
02
Source matching
Supplier options are compared against the confirmed product and application requirements.
03
Agreed inspection
Inspection scope and records are coordinated only as stated in the order.
04
Packing follow-up
Bag, box, pallet, labels, protection and consolidation details are followed up.
Product RFQ
Request a quotation for DIN 976-1 Threaded Rod
Attach a drawing, specification, photo, product list or project requirement and identify fields that cannot be substituted.
- DIN 976-1:2016-09 or approved drawing
- Diameter, pitch, tolerance and hand
- Length, cut tolerance and end treatment
- Material and mechanical requirement
- Finish, marking and straightness requirement
- Quantity, bundling, labels and documents
Fast quotation route
Send your product requirements
Use the full RFQ form to attach drawings, specifications or a multi-item list. Include the product standard or drawing, size, material, finish, quantity and destination.
Related products
Continue your sourcing list
DIN 934 Hex Nut
Continue the RFQ with the required thread, material, finish and assembly details.
DIN 125 Flat Washer
Continue the RFQ with the required thread, material, finish and assembly details.
Wedge Anchor
Continue the RFQ with the required thread, material, finish and assembly details.