01
Tapped housings
Insertion-end engagement and fit matched to the mating material.
Tap-End StudProduct form reference. Final thread, length, material, finish, marking and packing follow the approved RFQ.
Asymmetric thread-end studs
Tap-End Stud
Tap-end studs with a shorter insertion end and longer nut end, coordinated by the thread and fit at each end, engagement length, plain-body geometry, material, finish and approved assembly drawing.
- Standard number and edition or approved drawing revision
- Tap-end diameter, pitch/TPI, fit and engagement length
- Nut-end diameter, pitch/TPI, fit and thread length
- Overall length, plain-body diameter, runout and orientation
- Material, grade, finish, nuts, packing and documents
Catalogue ranges are RFQ guidance. Final compliance is controlled by the buyer-approved standard edition, drawing, specification and purchase order.
Quotation control
Quotation requirements
The exact standard or drawing, thread, length basis, material, finish, quantity and destination are confirmed before sourcing.
| Field | Product information | Order control |
|---|---|---|
| Requested product | Tap-end stud with asymmetric threaded ends | Confirmed per RFQ |
| Standard / drawing | Buyer-identified standard and edition or released drawing | Governing basis confirmed |
| Geometry | Overall/body length, tap-end and nut-end thread lengths, body diameter and end detail | Confirmed per RFQ |
| Material / grade | Specified steel, stainless grade or other buyer-approved material | Confirmed per RFQ |
| Assembly scope | Stud only or stated nut, washer, locking and end-protection scope | Confirmed per RFQ |
| Records | Dimensional report, material certificate, marking and traceability as ordered | Confirmed per RFQ |
Product overview
The insertion end and nut end perform different functions
A tap-end stud may use a shorter engagement end and a longer nut end, with different fit requirements at each side. Thread series, engagement, body diameter, runout and orientation must be recorded separately.
Some legacy standards identify a tap-end length as a multiple of diameter, but editions and project drawings differ. XHT does not infer the geometry from a commercial name or historical reference.
What to include in your RFQ
- Standard number and edition or approved drawing revision
- Tap-end diameter, pitch/TPI, fit and engagement length
- Nut-end diameter, pitch/TPI, fit and thread length
- Overall length, plain-body diameter, runout and orientation
- Material, grade, finish, nuts, packing and documents
Common ordering range
Common RFQ selections
Common tap-end stud enquiry fields. The approved standard edition or drawing controls every end-specific dimension and fit.
| Selection | Common enquiry options | Control |
|---|---|---|
| Tap end | Diameter, pitch/TPI, fit, engagement length and thread condition | Confirmed per RFQ |
| Nut end | Diameter, pitch/TPI, fit, thread length and protrusion | Confirmed per RFQ |
| Length / body | Overall length, plain-body length, diameter, relief and runout | Confirmed per RFQ |
| Material / properties | Steel or stainless grade with required heat treatment and properties | Confirmed per RFQ |
| Finish / locking | Surface treatment, patch, sealant or locking method when specified | Confirmed per RFQ |
| Assembly / packing | Nut, washer, orientation, end identification and protective packing | Confirmed per RFQ |
Custom supply: Non-standard thread, length, material, end treatment, marking, accessories and packing can be reviewed against a drawing, approved sample or complete specification.
Technical control
Use the governing document—not a catalogue assumption
Tap-end terminology is not globally uniform. Quote by exact standard number and edition or by a released drawing that separates the insertion-end and nut-end requirements; do not assume that the two ends use the same fit or thread length.
Applications & supply
Options matched to the assembly requirement
Application examples guide the RFQ. Suitability must be verified for the actual connection, service environment and governing specification.
02
Pumps & valves
Stud orientation and nut-side assembly controlled by drawing.
03
Engineered equipment
Material, heat treatment and locking method specified separately.
04
Replacement parts
Original drawing or approved sample used to prevent mismatch.
Quality & order coordination
A controlled route from RFQ to shipment
Inspection, certificates, traceability and packing are supplied only when agreed in the quotation and order.
01
Requirement check
Standard edition, drawing revision and critical fields are recorded.
02
Source matching
Cluster suppliers are compared against the confirmed requirement.
03
Agreed inspection
Threads, dimensions, finish and documents follow the agreed plan.
04
Packing follow-up
End protection, labels, bundles and shipment details are coordinated.
Related products
Complete your threaded fastener package
Double-End Stud
Threads at both ends with a plain shank for controlled engagement and assembly.
DIN 976-1 Threaded Rod
A continuous-thread option for cut lengths, supports and general stud applications.
ASTM A193 Grade B7 Stud Bolt
Alloy-steel stud bolting for specified high-temperature or high-pressure service.
Product RFQ
Request a quotation for Tap-End Stud
Send a standard edition, drawing, BOM, approved sample or product list. Mark every thread, length, grade, test and document field that must not be substituted.