01
Solar Mid Clamps
Adjacent-module clamping coordinated by frame height, rail channel and bolt engagement.
Solar mounting hardware & components
Solar Mounting Hardware Sourced to Roof, Rail and Ground Geometry
Module clamps, roof interfaces, rail hardware, fastener kits and ground foundations coordinated against the approved mounting-system drawing, environment and project requirements.
Core product families
Start with the component that controls your assembly
Select the closest product family, then send the mating profile, drawing or approved sample for confirmation.
02
Solar End Clamps
Array-edge clamps supplied to the module frame height and compatible rail-nut geometry.
03
Adjustable Roof Hooks
Stainless roof hooks matched to tile clearance, rafter position and rail elevation.
04
L-Feet & Mounting Bases
Roof and bracket interfaces supplied with project-specific slots, pads and fasteners.
05
Metal Roof Clamps
Standing-seam and profiled-sheet interfaces selected from the actual roof geometry.
06
Rail Splice Connectors
Internal and external rail connectors matched to the profile, overlap and hole pattern.
07
Channel Nuts & Rail Nuts
Profile nuts coordinated by rail cavity, metric thread and anti-rotation feature.
08
Ground Screws & Foundation Piles
Engineered ground foundations quoted against soil, structural and verification data.
Ground foundation focus
Solar Ground Screws Are Engineered Foundations
Ground screws, helical piles and connection heads are quoted from the foundation schedule, soil information, structural actions and agreed field-verification plan.
- Soil investigation and corrosivity information
- Shaft diameter, wall thickness and total length
- Helix diameter, pitch, thickness and weld detail
- Flange, U-head, socket or post connection drawing
- Compression, uplift, lateral and moment actions
- Installation torque and load-test requirements
Engineering control: no generic load capacity is assumed without project data and agreed verification.
Solar fastener assemblies
Rail & Roof Fasteners
These established RFQ pages remain part of the expanded solar range.
Solar Hanger Bolt with EPDM Washer
Dual-thread roof fastener assemblies coordinated with substrate, stand-off and sealing requirements.
Solar T-Bolt
Rail-slot T-bolts and hammer-head bolts matched to head, neck and channel geometry.
Extended project sourcing
Supporting Solar Hardware
Available when drawings, materials and project interfaces are supplied.
BP
Base Plates & Brackets
Two-, three- and four-hole bases, angle plates, triangular connectors and non-welded brackets.
GB
Grounding & Bonding
Bonding washers, grounding clips and approved small-part assemblies treated as system components.
WD
Waterproofing & Drainage
Roof channels, flashing interfaces and drainage accessories reviewed from roof and installation drawings.
PK
Project Kits & Packing
Pre-assembled hardware, labelled bags, bill-of-material packing and mixed-order consolidation.
Scope control: electrical connectors such as MC4 remain outside this mounting-hardware range unless an approved electrical specification and compliant source are confirmed.
Supply options
Fields reviewed for a comparable quotation
The following are enquiry fields, not a claim that every combination is stocked, approved or certified.
| Field | Information to specify | Quotation treatment |
|---|---|---|
| Mounting system | Roof, rail, module, support or ground-foundation drawing and revision | Used as the main interface basis. |
| Roof / support | Tile, seam, metal sheet, timber, purlin, concrete or ground structure | Required for interface selection. |
| Geometry | Profile, slots, holes, clamp range, thread and mating-component dimensions | Confirmed against the assembly. |
| Material & corrosion | Aluminium, stainless, steel, coating and environmental requirement | Compatibility reviewed across the system. |
| Fastener details | Thread, grade, length, engagement, locking and installation requirement | Confirmed per RFQ. |
| Ground foundation | Soil information, shaft, helix, top connection, design actions and field tests | Engineering basis required. |
| Evidence | Inspection, certificates, coating records, traceability or agreed test documents | Quoted only when specified. |
| Kits & packing | Pre-assembly, BOM, labels, cartons, bundles and project sequence | Quoted by item and project reference. |
Application paths
Choose the installation environment first
Application cards guide the RFQ; final suitability follows the actual structure and governing specification.
PR
Pitched Roofs
Hooks, hanger bolts, rails and module clamps coordinated with the roof build-up.
MR
Metal Roofs
Seam clamps, sheet interfaces and rail hardware matched to the roof profile.
GM
Ground Mounting
Ground screws, posts, connectors, clamps and structural hardware by project design.
KD
Kits & Distribution
Repeat hardware sets, labels, protection and mixed-product consolidation.
RFQ checklist
Send enough detail to compare the same product
- Mounting-system and component drawing
- Roof, support, rail profile or ground-foundation information
- Module frame, clamp range, thread and mating interfaces
- Material, coating, corrosion and bonding requirements
- Critical tolerances, tests, approvals and traceability
- Kit quantity, packing sequence and destination
Have a drawing or BOM?
Start with the interfaces that cannot be substituted
Use the RFQ page and mark all critical dimensions, documents and project controls.
Related categories
Continue building the project hardware list
Custom & Drawing-Based Parts
Non-standard brackets, plates, machined parts and project assemblies.